2005 Sabre 426

Entering from the companionway there is a U-shaped Galley to starboard. The enclosed Guest Cabin is to port with double berth and vanity sink. The Nav is forward of the Guest Cabin. It features a bench seat that faces forward. The Main Salon features an L-Settee (converts to double) to port and a straight settee to starboard. The dining table is bulkhead mounted and services both settees. The cushions in the main saloon are the optional Ultra Suede upgraded fabric. The Head is forward of the Main Salon on the portside with sink, vanity and separate shower stall. It has dual access from the Main Salon or the Owner's cabin. Owner's cabin is all the way forward with Island berth, ample storage and en-suite access to the Head. The Head is on the portside with sink, vanity, soap dispenser  and separate shower stall. 

• (5) Cabin fans 12v
• Overhead Hatches w/ Ocean Aire screens and shades
• Soft blinds for windows and blinds
• Interior cushions are blue ultra-suede

• Corian counter tops
• Refrigeration is both front and top opening
• Force 10 propane stove with oven
• Butcher Block stove cover
• Xintrex propane solenoid w/ vapor detector
• Seafrost 12v  refrigeration with (2) holding plates
• Built-in Microwave
• H&C Pressure water
• Manual freshwater
• Manual Saltwater
• Double Stainless steel sinks with Corian inserts
• Sabre dish drain locker

• Hand crafted interior joinery in American cherry in gloss varnish
• 6'6" headroom in main and aft areas, with 6'4" headroom in forward cabin
• Forward cabin has a 6'10" long berth
• Main cabin has (2) 6' 6" settee berths, port side converts to double.
• Aft-cabin with 6'10" long, full width double berth
• Ample drawers in cabins galley and main salon. Drawer boxes are Maple and have dovetailed corners.
• Flat panel passageway doors
• Large, cedar lined hanging lockers in forward and aft cabins.
• Optimized area for instrument installation, storage locker space and panel arrangement at the chart table.
• Locker doors are louvered.

The Sabre 426 embraces the standards which have put Sabre's name atop the quality spectrum of boatbuilding for the last 30 years. Current Sabre owners and those who have followed the brand over time, will see details here which make it feel familiar. Details which make sense, which add to comfort, security and well being. Logical details that, above all, make each Sabre design a great safe and beautiful sailboat. But details from the past are just part of the story. Keeping up with technology has to go hand in hand with our desire to build the finest possible sailing yachts for our clients. The Sabre 426 hull and deck will be built using vacuum bagged, closed cell, cross linked PVC foam and structural E Glass, which will give her one of the strongest, lightest, most durable structures available today. Hull lines, underwater appendages and rigs were drawn by Jim Taylor Yacht Design. The deck, deck styling and interior were accomplished by the Sabre Design Team. The result is a yacht which will, like her siblings, establish a benchmark in sailing that will endure for many years to come.

Keel Type: Wing
Ballast: 8650 lb
Displacement: 24,500 sq ft
Max Draft: 5' 2" 

External Lead

• Hall Spar mast head rigged Aluminum mast and boom with white Awlgrip finish
• Triple, airfoil spreaders
• Stainless steel chainplates thru-bolted to chainplate bulkheads which are bonded to the hull. Chainplates grounded to the keel.
• Standing rigging is Navtec rod
• All running rigging is color coded
• Split Backstay with Navtec Hydraulic Adjuster
• Hall Quick Vang
• Harken adjustable genoa tracks
• Dutchman Mainsail System
• Antal Mainsail slide system
• Spread flag halyard
• Masthead flag halyard
• Electric Halyard Winch
• Running backstays
• Removable Inner forestay - Cutter sail configuration
• North Mainsail - full batten
• North 140 % Genoa
• North Asymmetrical w/ sock
•  North Cutter heavy air jib 
• Harken Roller furling Mk III
• 
  I : 56.33 ft
  J : 16.50 ft
  P : 49.33 ft
  E : 17.42 ft
  Working Sail Area : 920.00 sq ft

- Hall Spar mast head rigged Aluminum mast and boom with white Awlgrip finish
- Triple, airfoil spreaders
- Pre-wired with radio cable
- Stainless steel chainplates thru-bolted to chainplate bulkheads which are bonded to the hull. Chainplates grounded to the keel.
- Standing rigging is Navtec rod
- All running rigging is color coded

• (6) Group 31 AGM Batteries
• 110 volt Shore Power
• (3) Solar panels w/ (3) Regulators
• 105 amp Balmar Alternator
• Magnum inverter/charger - 2017
• Most light converted to LED
• 110V shore power system with GFI protected in galley and head. 
• Macerator pump for head
• Master AC/DC panels, located in the navigation area, include AC/DC volt and ammeters, marine circuit breakers, and polarity indicator.
• All wiring is color coded and tinned and meets USCG standards
• Interior lighting by Cantalupi

• 2018 B&G Touch Screen Electronics
• B&G Autopilot
• B&G  (2) Autopilot touch pads (either side of  helm)
• B&G Radar
• B&G Chartplotter at helm 9"
• B&G Chartploter at Nav station 12"
• B&G (2) Multi - Depth, Speed, Wind and Autopilot
• AIS
• Icom VHF
• VHF Ram Mic at helm
• Icom SSB - (tuner and receiver not installed)
• USB ports at Nav Station and in main salon
• Fusion Stereo w/ sirus 
• Cockpit and cabin speakers
• Stern mounted Radar mast

• Hull color is Flag Blue "Awlcraft"
• Two tone deck - beige
• Double lifelines with gates
• Stern gate
• Swim ladder
• Pad eyes for jacklines and harnesses
• Dodger with Polycarbonate glass also in  zip off side curtains
• Bimini w/ connector
• Cockpit cushions - 3"
• Teak cockpit table w/ cover
• SOS Danbuoy
• Switlik MOM 8 - A
• Horseshoe life ring
• Lifesling
• Quick Electric Windless
• 33lb Delta Anchor w/ 40' chain and 150' rode
• CG Safety gear
• Ensign
• Freshwater washdown (bow)
• Saltwater washdown (bow)
• Cockpit shower H&C
• Dedicated propane locker with (2) propane tanks

• Thru-hulls installed for Air-conditioning and Generator
• Racor fuel filters
• Vacuum gauge for fuel filter
• Tank Watch holding tank gauge
• Numerous spares
• 3 Blade Maxprop

• Personal Items
• Tools
• Galleyware
• Drink holder at helm

Potential purchasers should assume that any items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht. These specifications are believed to be correct but cannot be guaranteed. Specifications are provided for information purposes. Data was obtained from sources believed reliable but is not guaranteed by owner or brokers. Engine hours are approximate, may be reported verbally by the seller, and are recorded at the time and date of the original listing of this vessel. Owner's use during the time of this listing may affect the total engine hours upon a prospective buyer's inspection. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his/her agents or his/her surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes or withdrawal from market without notice.