Back to top

2015 C&C 30

Annapolis, Maryland


C&C 30 by US Watercraft - This is a grand prix program.   Indoor climate control storage.  Ready to go race Program!   No expense spared! 

Call today for a showing! 


Basic Boat Info

Price: $139,500
Boat Name: ANEMA & CORE
Make: C&C
Model: 30
Year: 2015
Condition: Used
Category: Sail
Builder: C&C US Watercraft
Designer: Mark Mills
Construction: Composite
Boat Hull ID: USWC3024H515
Has Hull ID: Yes
Keel Type: Bulb Keel


Length: 30 ft
Length Overall: 30 ft
Waterline Length: 28'8 ft
Beam: 9'10 ft
Max Draft: 7'6 ft
Displacement: 3,995 lb
Ballast: 1,579 lb
Single Berths: 4
Cabins Count: 1

Engines / Speed

Engines: 1
  • Make: Volvo
  • Model: D1-13
  • Drive Type: SailDrive
  • Fuel: Diesel
  • Engine Power: 12hp
  • Type: Inboard
  • Propeller Type: 2 Blade, Bronze, Folding
  • Year: 2015


Fuel Tanks: 1
Fuel Tank Capacity: 7 gal


Heads Count: 1
Drive Type: Sail
Boat Class: Racers


Tommy Mercer
Listing Brokers - Tommy & Chris Mercer Wilmington NC @ Wilmington Marine Center - 980-939-4928 - 704-450-1688 Contact us today to arrange a showing or Answer ANY questions.
Crusader Yacht Sales


Crusader Yacht Sales
7078 Bembe Beach Road
Annapolis, Maryland, US, 21403

  • Hull and deck are Vinylester / E-Glass / Foam Core Resin-Infused,
  • Carbon Reinforcing in Structural Grid.Keel:
  • Carbon Fiber Fin / Lead Bulb / Retracts for Transport
  • Rudder: Carbon Fiber Stock / E-Glass and Carbon Fiber Reinforced Blade
  • Self-Aligning Roller Bearings
  • Open racing interior
  • Port a Potty forward
  • 2 settee berths amidships
  • Storage under berths
  • 12v DC Distribution Panel

  • Main Battery Switch

  • Battery 70 RC/55 AH Deep Cycle (Second Battery Optional)

  • Alternator 115 Amp

  • ORC ApprovedNavigation Lights

  • LED Overhead Lights

  • 12v DC bilge pump option installed

  • B&G H5000 CPU Hercules

  • B&G Go Free Wireless system

  • 4 B&G 20/20 Displays on mast pod

  • 1 B&G H500 color Graphic Display

  • H5000 Speed Sensor

  • DT800 Depth Sensor

  • B&G Vertical MHU Wind Sensor

  • RC42N Compass

  • Panasonic Tough book with Expedition

  • System Professionally Calibrated

  • Inboard Diesel Engine, Volvo Sail-drive 12 HP
  • Two Blade Folding Race Propeller
  • Fuel Tank 6.5 US Gallon (25 liter)
  • Fuel Filter & Water Separator
  • Water-lock Muffler
  • Primary Winches: 2 x Harken 40.2 PT

  • Backstay Winches: 2 x Harken 35.2 ST

  • Handles: 3 x Harken

  • Custom Bow / Stern Pulpits with Running Lights

  • Stanchions: Tapered S/S with Braces

  • Lifelines: Dyneema Upper & Lower

  • Rope Clutches, Spinlock

  • Jib Leads, Athwart ship In/Out Up/ Down

  • Controls Below Deck to Trimmer

  • Jib Cunningham Below Deck to Trimmer

  • Cunningham 5:1 & Outhaul 8:1 lead aft to pit

  • Mainsheet: 16:1, Coarse Tune / Fine Tune

  • Traveler 4:1 to Main Trimmer

  • Vang, Spectra 16:1Tack line to Spinlock Clutch

  • Foredeck Hatch Lewmar 22” Diameter Round

  • Accessible Port on Cockpit Face for Lines

  • Composite Tiller with Tiller Extension

  • Hall Spars Carbon Fiber Rig: Two Sets Swept Spreaders  
  • Carbon Bow Sprit, Removable for Docking & Transport
  • Halyard Locks for Main & Primary Jib
  • Aluminum Boom with 8:1 Outhaul & Provision for 1 Reef
  • Two Dyneema Topmast Running Backstays
  • Shrouds: 1 X 19 S/S Wire
  • New England Ropes Running Rigging Package
  • All Necessary Blocks, Cleats, and Halyard Locks
  • Optional hydraulic mast jack installed
  • Optional Harken Carbo Foil installed
  • Optional second jib halyard installed
  • Optional GP upgraded running rigging package included
  • Main- 2015 not buttoned Chesapeake Sail makers

  • Main- 2016 buttoned Chesapeake Sail makers

  • Main- 2017 buttoned Elvstrom

  • J1- 2015 buttoned Chesapeake Sail Makers

  • J1- 2017 buttoned Elvstrom

  • J2- 2015 not buttoned Chesapeake Sail makers

  • J2- 2016 buttoned Chesapeake Sail makers

  • J2- 2017 buttoned Elvstrom

  • J3- 2016 buttoned Chesapeake Sail makers

  • A1- 2016 not buttoned Chesapeake Sail makers

  • A1.5- 2015 not buttoned Chesapeake Sail makers

  • A1.5- 2017 buttoned Elvstrom

  • A2- 2015 not buttoned Chesapeake Sail makers

  • A2-2017 buttoned Elvstrom

  • A3- 2017 buttoned Elvstrom – Never Used

  • TRAILER - High/Low galvanized steel with hull formed bunks

  • Grand prix race bottom to 600 grit finish
  • Sea-deck 5mm non-skid in cockpit (New November 2016)
  • Carbon Fiber Bow Roller for Spinnaker takedown system
  • Single point lift harness
  • Keel Clamshell for trailering
  • Custom Mast Cover
  • Custom Boom Cover
  • Custom Tiller Cover
  • Custom Padded bow Sprit Cover
  • Instrument mast pod Cover
  • Spreader Bag
  • Dehumidifier
  • Trailer box
  • 4 Dock lines, 3 fenders
  • Jib Sheets

  • Spinnaker Sheets

  • RunnersRunner Tails

  • Main Halyard

  • Spinnaker Halyard

  • Tiller

  • Wind cups and Windex


Anema & Core is a professionally maintained, complete turnkey package ready to launch and race. Always dry-sailed and currently stored indoors in climate-controlled facility. The name Anema & Core is reserved by the Seller and is not transferable to a Buyer.

Contact us today to answer any questions or to  make arrangement for a showing.

You will NOT be disappointed! 


Potential purchasers should assume that any items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht. These specifications are believed to be correct but cannot be guaranteed. Specifications are provided for information purposes. Data was obtained from sources believed reliable but is not guaranteed by owner or brokers. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his/her agents or his/her surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes or withdrawal from market without notice.

Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.